Download
ISO & Linux USB Creator.


A2z Termination Rate Sheet


A2z Termination Rate Sheet

How to Install


PC/Laptop Configuration:

• Dual Core/Core2du or higher CPU.

• 2GB/4GB or Higher RAM/Memory.

• 4GB/8GB or Higher Flash/Pen Drive.

• Burn our RBO_Live.iso in Flash/Pen Drive by Linux USB Creator & Run PC/Laptop
  with Flash/Pen Drive.

Step-1:Connection process:

• Step 1: ISP line or wimax modem line is connect with switch.

• Step 2: Use another two cable, one is connected to your pc/laptop and another is connected
  from your gateway device. That's all

• Step 3: Set the following IP Parameters to your gateway:

→ IP: 192.168.102.1

→ Mask: 255.255.255.0

→ Default Gw: 192.168.102.1

• Step 4 : Allow 192.168.102.1 IP to accept voip calls on your gateway.

• Step 5: Provide us Your PC/Laptop Full MAC Address with (:) colon like: 00:0C:29:51:97:E2

Installation Process of Puppy Version.

Step-1:Download RBO Live ISO.

• Please download RBO Live.iso file from here Download RBO After downloading follow the
  following step.

Step-2: Download Universal USB Installer & Run

• 2.1. Please download Linux Live USB Generator (LiLi) from here Download Lili. After
  downloading double click on the installer file and it will guide you through the process
  of installing the software.

• 2.2. Select the "drive name of your pen drive" from dropdown menu (Choose Your Key)

Choose Key

• 2.3. Click on the ISO / IMG / ZIP and select the RBO ISO which one you downloaded in step-1.

Source File

• 2.4. Check/Tick the box Format the key in FAT32? for format your pendrive.

Options

• 2.5. Finally press the button and after few minutes install will be finished.

Create

Step-3: Restart Your PC& Save Files

• Step 1: Press enter when the SAVE TO FILE screen appear.

Options

• Step 2: Choose ext3 using your arrow keys and press enter.

Options

• Step 3: Press enter and go to the next screen.

Options

• Step 4: If Normal (no encrypt.) is the default option then press enter and go to the next screen.

Options

• Step 5: Choose 2 GB or the last one using the up/down arrow keys.

Options

• Step 6: If default option YES, SAVE is selected. just press enter.

Options


• Now your RBO Local PC is ready. Just Add Origination IP On your Portal & Start Traffic.